Automotive (car) paint color paint

Automobile (car) paint function: this two-component industrial plain paint film light brightness is high, good hiding power, not easy to fade, color is bright, use is very convenient.
 
Scope of paint application: widely used in automotive, signs, sculpture, mechanical equipment, entertainment equipment and other industrial fields.
 
Function: other, finish
 
Solvent: oily paint
 
Color: all colors
 
Luster: 92 degrees
 
No scratch hardness: 6H
 
Adhesion: 100 case test 1


 
Product technological characteristics of automotive (car) paint:
 
A two-component plain color lacquer is paint supplies a industrial paint, widely used in cars, signs, sculpture, machinery and equipment, amusement equipment, etc. industries, drying speed, high brightness, simple construction.
 
Drying time of automotive (car) paint:
 
1, the surface of the drying time is: 20 degrees at room temperature for 30 minutes to achieve the table dry;
 
2, thoroughly dry should use the curing agent: usually 20 degree condition needs 20 hours, 60 degree environment needs 1 hours;
 
3, thoroughly dry, such as the use of ultra fast dry curing agent: 20 degree environment can be 6 hours, 60 degrees, 30 minutes can be.
 
Base material of automotive (car) paint:
 
1, all kinds of old paint layer;
 
2, painted on the bottom of the paint and primer
 
Product advantage of automotive (car) paint:
 
This two-component industrial plain paint film light brightness is high, good hiding power, not easy to fade, color is bright, use very convenient.
 
Product use of automotive (car) paint:
 
Widely used in automobiles, signs, sculpture, mechanical equipment, entertainment equipment and other industrial fields.
 
Spraying area:
 
2K industrial paint plain per kilogram spraying 5-6 square meters of area, than the traditional plain paint paint spraying, effectively save the cost
 
Color:
 
According to the model, plain paint color card, color cards, Raul GB Pantone custom colors.
 
Coating preparation and construction parameters
 
Mixing ratio of automotive (car) paint:
 
1, the original paint curing agent: quick drying: drying thinner =100:50:20
 
2, the original paint: standard curing agent: Standard thinner =100:50:20
 
3, the original paint: slow curing agent: slow dry thinners =100:50:20
 
Coating preparation and construction parameters
 
Mixing ratio
 
1, the original paint drying: drying curing agent, thinner =100:50:20
 
2, the original paint: standard curing agent, thinner =100:50:20 standard
 
3, the original paint: slow curing agent, thinner slow dry =100:50:20
 
4, the original paint: super dry curing agent (winter) - thinner =100:50:20
 
5, the original paint: super dry curing agent (Xia Yong), the standard /1143 =100:50:20 slow dry thinners
 
Note: before mixing must be fully stirred, so that the color is uniform, so as not to appear due to uneven color and color.
 
Spray channel number
 
Wet spray 2-3 interval 5-10 minutes
 
Matters needing attention
 
Paint coating of automotive (car) paint:
 
1, 24 hours after the general can be re coated
 
2, such as the use of ultra fast dry curing agent 6 hours after the re coating
 
Polishing should be in:
 
24, spray 1 hours after the
 
2, the use of ultra fast dry curing agent for 6 hours after polishing
 
Automotive (car) paint recommended: in small area of paint spraying, choose to use the super quick drying varnish curing agent, can save a lot of spray drying time.
Online Inquiry

    My status